Driveway Paving Mold Tools Concrete Pathmate Patio/Garden Walk Maker Mould

Description

Features:
1. This DIY plastic molded paving mold is spread in Europe and America, is a personalized brick mold.
2. With this Molded Mulch Film,you can personalized create your own style garden path in minutes.
3. DIY plastic molded paving mold, is a personalized brick mold,laying out the effect posted up like blocks of stones, so the path is moreexotic, to create a style of their own garden path.
​
Specification:
Newand high quality
Material: PPResin
Size: 43x43x4cm
Color: Black
How to use this Concrete Paver Mold to build the pathways:
Step 1:
Mix cement withwater, according to package directions. When ready to use, the concrete will bethe consistency of oatmeal and thick enough to hold an edge when you slice intoit with a shovel.
Step 2:
Fill the paver mold,scooping the concrete in with a shovel and making sure to fill each area.
Step 3:
Using rubber gloves,spread the concrete around the mold, filling in any gaps or low points. Tap themold with your hand to eliminate any air bubbles.
Step 4:
Following thecontours of the mold, smooth out the concrete, wiping away any excess.
Step 5:
Allow the concrete toset for a maximum of five minutes, then carefully remove the mold. For the nextstretch, rotate the mold a quarter-turn and place it beside the paver justcompleted, angling slightly if you're creating a curving pathway.
Step 6:
After letting theconcrete cure overnight, fill the cracks with dirt and wash away any excess.Wet the ground around the newly formed pavers to help them settle
Package include:
1 x Garden Walk Maker Mould
Notice:
Please allow 1-3cm error due to manual measurement.