IES 631 QUICK-WELD ADHESIVE KIT

Description

QUICK-WELD ADHESIVES are revolutionary new bonding liquids which are dramatically changing the types of adhesives used in the automotive industry. QUICK-WELD is an excellent adhesive for repairing plastic grilles, SMC body parts, urethane parts, rubber and various other types of plastic. This solvent-free, single component product bonds almost all types of close fitting materials in seconds. Metals, plastics, elastomers, ceramics, leather, glass, etc. can all be bonded at room temperature. QUICK-WELD is easy to use and produces a strong transparent bond almost instantly which cures to a film strength of up to 4000 psi with excellent chemical resistance.
QUICK-WELD #1 612 A low viscosity, water-thin adhesive used mainly for bonding close fitting parts or where penetration is needed. Part No. 1 oz. Bottle
QUICK-WELD #2 622 A high viscosity (thicker) adhesive used to bond irregular surfaces or when gap filling requirements are needed. The cure time is slightly slower to allow a few seconds for alignment of parts. Part No. 1 oz. Bottle
When QUICK-SET ACTIVATOR is applied to cyanoacrylate adhesives (instant glues), an exothermic reaction occurs. Do not activate instant glues on skin as harmful burns may result. Product No.650  4 oz. Pump Spray Bottle
QUICK-SETACTIVATOR CAUTION: 650 Used to prime surfaces to be bonded. On porous material such as fiberglass and SMC body parts, QUICK-SET ACTIVATOR can be applied prior to applying QUICK-SET ADHESIVE to insure a quick and total bond. Simply apply the activator to one of the surfaces to be bonded, allow the solvent carrier to evaporate and then bond as usual. Even though the solvent has evaporated, the sprayed area still remains active for up to 10 minutes. QUICK-SET ACTIVATOR can also be sprayed onto the bond area over the QUICK-WELD ADHESIVE to lessen the cure time, especially where gaps or voids exist up to .020”.