IES 8412 INTERMIX 5 LIMITED FLOW SEAM SEALER/ADHESIVE 10 OZ/300ML,

Description

INTER-MIX 5 Adhesive/Seam Sealer
Is a firm, semi-flexible, adhesive/sealant designed for sealing vertical and horizontal seams and joints on automobiles and truck applications.
Excellent adhesion to:
bare metal,
primed metal,
SMC,
FRP,
f
iberglass,
aluminum
most plastics.
Can be sprayed with our 2K Spray System.
* For TPO and Polypropylene plastics, use IES #4182 INTER-BOND Adhesion Promoter.
DIRECTIONS
1. Surface must be clean and free of dirt, grease, oil, rust, old seam sealer and any other contaminants. Use IES Super Cleaning Solvent or IES Specialty Adhesive Remover to clean the surface.
2
. Prime all bare metal with epoxy or urethane primer. Allow primer to cure according to manufacturer’s recommendations.
3. Follow the IES dual cartridge set up instructions for loading cartridge into the dispensing gun.
4. Dispense IES 8412/8612 Seam Sealer into the joint or seam. Smooth out if desired with tool or fi nger and feather edge.
5. IES 8412/8612 will set up in approximately 5-10 minutes.
6. Scuff or sand sealer with 320 grit sandpaper prior to priming or painting.
7. Prime and paint per manufacturer’s specifi
cations.
TECHNICAL INFO
Mixed Color Gray
Mix Ratio 1:1
Work Time 5-10 Minutes
Handling Time 10-20 Minutes
Part Paint-ability 20-30 Minutes
Sealer Sand-ability 20-30 Minutes
Full Cure Strength 6-8 Hours
All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity