-40%
IES 8611 INTERMIX 15 SEAM SEALER/ADHESIVE 6.76 OZ/200ML LIMITED FLOW
$ 18.47
- Description
- Size Guide
Description
INTER-MIX 15 Adhesive/Seam SealerI
s a firm, semi-flexible, adhesive/sealant designed for sealing vertical and horizontal seams and joints on automobiles and truck applications.
Excellent adhesion to:
bare metal,
primed metal,
SMC,
FRP,
fiberglass,
aluminum
most plastics*.
Can be sprayed with our 2K Spray System. *
For TPO and Polypropylene plastics, use IES #4182 INTER-BOND Adhesion Promoter.
DIRECTIONS
1. Surface must be clean and free of dirt, grease, oil, rust, old seam sealer and any other contaminants. Use IES Super Cleaning Solvent or IES Specialty Adhesive Remover to clean the surface.
2. Prime all bare metal with epoxy or urethane primer. Allow primer to cure according to manufacturer’s recommendations.
3. Follow the IES dual cartridge set up instructions for loading cartridge into the dispensing gun.
4. Dispense IES 8411/8611 Seam Sealer into the joint or seam. Smooth out if desired with tool or fi nger and feather edge.
5. IES 8411/8611 will set up in approximately 15 minutes.
6. Scuff or sand sealer with 320 grit sandpaper prior to priming or painting.
7. Prime and paint per manufacturer’s specifications
PROPERTIES
Mixed Color Gray
Mix Ratio 1:1
Work Time 15-20 Minutes
Handling Time 20-30 Minutes Part
Paint-ability 45 Minutes
Sealer Sand-ability 45 Minutes
Full Cure Strength 6-8 Hours