-40%
National Instruments PCI-7314 Motion Controller Card, 4-Axis, Stepper Motor
$ 155.76
- Description
- Size Guide
Description
National Instruments PCI-7314 motion controller card for 4-axis open-loop stepper motor control. Untested, but believed to be fully functional.Important note: This is a legacy card that is not compatible with NI Motion drivers. This card requires NI ValueMotion software, which is only supported under Win 2000 and earlier versions of Windows.
The 7324/7314 controllers are stepper motor controllers for PCI and PXI bus computers. These controllers provide fully programmable motion control for up to four independent axes of motors, with additional I/O for limit and home switches as well as other general-purpose functions. You can use these controllers in position or velocity control applications, with support for point-to-point position, velocity profiling, and event-based motion profiling modes. The 7324 closed-loop controllers control stepper motors and can operate in open or closed-loop mode. They use quadrature encoders for position and velocity feedback, and clockwise (CW) / counter-clockwise (CCW) or step/direction digital outputs for command. The 7314 open-loop stepper controllers do not include the quadrature decoders and can operate only in open-loop mode. All controllers support full, half, and microstepping applications.
For additional information and resources, use the model name to search the manufacturer's website.